proway

Can solve grinding process problems
What is a coolant filtration device?

This section provides a detailed summary of Proway's product features and strengths, as well as actual case studies of actual installations.

What is Proway's coolant filtration system?

PRO-F Abs

Cited from: https://www.prowei.com/products/?mode=detail&article=23

Proway's PRO-F Abs is a filtration system that uses an "Absolute Cartridge Filter" made of polypropylene material with no adhesives, additives, or lubricants.It has the ability to remove foreign matter of 1 to 10 μm or less, and is expected to reduce damage to workpieces caused by foreign matter, as well as dirt and stains in the cleaning process.

Vortex Circular Coolant Tank OCS-075

Cited from: https://www.prowei.com/products/?mode=detail&article=17

OCS-075 vortex circular coolant tank manufactured for sites where grinding machines and water soluble coolant tanks are used for magnetic workpieces.Filterless type equipment with no filter used in any part of the systemThe product is designed to be A two-stage separation device, a cyclone and a magnetic separator, is used to increase the capture rate of sludge.

Centrifugal solid-liquid separator application equipment VORTEX DYNAMIC FILTER

Cited from: https://www.prowei.com/products/?mode=detail&article=16

Centrifugal force is used for filter-less solid-liquid separation.Less worry about filter replacement and industrial waste, and reduced life-cycle costs.You can also choose from three types to meet your needs: stainless steel, plastic resin, and polyvinyl chloride.

What is the right product selection that can solve the problem?

Coolant filtration systems differ from one company to another in terms of products and features. It is important to select a product that meets your company's challenges in order to achieve the best results from the introduction of the product. This site introduces recommended products by issue.

What is the difference between products?
See how to choose the right coolant filtration system

Proway Case Studies

Significantly reduces losses due to problems

The frequency of coolant replacement in the grinding process was increasing due to deteriorating grinding conditions caused by sludge accumulation and frequent pump problems. After introducing Proway's PRO-F1, the frequency of fluid changes was reduced from once a month to twice a year.Reduction of loss cost from over 500,000 yen per year to about 80,000 yenI was able to do it.

Example: Reduction of re-deposition on parts to be cleaned.

Floating oil and contamination occurred during hot water cleaning of aluminum parts, floating in the cleaning solution tank and contaminating the cleaning water.

Therefore, we introduced PRO-F1, a cartridge filter filtration system from Proway. By collecting and filtering suspended solids,Maintains cleanliness of wash waterThe new system is now being used for the first time in the world. Due to this,This has also led to a reduction in wastewater volume.

Process of contacting and introducing Proway

Regarding product orders and inquiries, PROWAY accepts them via an inquiry form. After the inquiry, a representative will contact you to discuss on-site problems and issues. Hearing about required functions and specifications, availability of options, installation location, number of units, etc., a product proposal will be made after an on-site inspection if necessary.

The appropriate product for the site and a quote for installation will then be presented to you for review and once you are satisfied, the contracting phase will begin. Once a purchase order is issued to the distributor, the products are arranged and delivered on time. After delivery, the product will be commissioned by a service representative. If you have also ordered installation work, the person in charge will handle the entire installation process.

What kind of company is Proway?

静岡県浜松市に本社を構えるプロウェイは、地域密着型の流体コンサルタント会社。現場での調査や打ち合わせなど、フットワークの軽さとキメ細やかな対応を強みとしています。部品加工や研磨工程におけるクーラント液の長寿命化、スラッジ回収といった分野に豊富な実績を持ち、現場の多様化する課題に対して柔軟な対応を心がけています。

プロウェイのその他サービスについて

プロウェイでは、「デモ機お試しキャンペーンキャンペーン」として、多用途に使えるろ過器のデモ機貸出を行っています。電源工事が不要で使えるシリーズで、借りられるのは5日間です。

デモ機の貸出費として11,000円かかりますが、導入前にまずは現場で試してみたいという方におすすめです。プロウェイの代理店に電話で申し込むか、キャンペーン専用のフォームに必要事項を入力して送信すれば、詳細を問い合わせることもできます。

プロウェイの会社概要

For grinding process】 【For grinding process】.
Coolant filtration system
Three recommendations

Coolant filtration equipment is used to filter sludge generated from equipment. There are a variety of products available depending on the intended use, so it is important to determine "whether the coolant filtration equipment is suitable for the purpose" and "whether the equipment is suited to the characteristics of sludge.

Filter filtration system capable of filtering all "fine" sludge of 3μm or less Filter filtration system capable of filtering all "fine" sludge of 3 microns or less

Sun Maintenance Koki

Reference: Sun Maintenance Koki official website (https://www.smk-web.co.jp/index.html)

Main materials that can be filtered

• Brittle materials such as cemented carbide, ceramics, and castings

For factories like this

• I want to filter fine sludge less than 3μ.
• I want to use it as a secondary process
• To remove sludge that could not be filtered by other equipment

Check equipment on official website

Capable of filtering "large volumes" of up to 200 l/min Centrifuge

Toto Separator Kogyo Co.

Reference: Toto Separator Industry official website (https://centrifuge-tsk.com/)

Main materials that can be filtered

• Brittle materials such as cemented carbide, ceramics, and castings

For factories like this

• I want to filter more than 100 L
• I want to use it as a primary process
• Want to reduce running costs

Check equipment on official website

High magnetic force filters 5 microns or less High magnetic force enables filtration of 5 microns or less. Magnetic Separator

Sumitomo Heavy Industries Finetech, Ltd.

Reference: Sumitomo Heavy Industries Finetech official website (https://www.shi-ftec.co.jp/)

Main materials that can be filtered

• Metal materials such as aluminum, steel, and iron

For factories like this

• I want to filter metal materials.
• I want to use it as a primary process
• I want to remove metal sludge.

Check equipment on official website