CNK

CNK is a manufacturer of machine tool peripherals. It manufactures coolant systems to maintain grinding performance and reduce costs. The following is a summary of the company's coolant filtration systems, their features and strengths.

What is CNK's coolant filtration system?

Coolant System for Grinding High Precision Parts K Series

This coolant filtration system is designed for grinding high-precision parts such as hydraulic rods and spindles, etc. The two-stage filtration structure is a key feature of this system, which ensures stable cleanliness. primary filtration is done with a magnet, and secondary filtration is done with a cyclone filter. Since no filter is used for filtration, the system has succeeded in reducing environmental impact.

In addition, space saving is achieved by downsizing the system.Much smaller than the company's previous products, the K series can be easily installed in cases where the coolant system is difficult to locate.The following is a list of the most common problems with the

High Precision Filtration Coolant System D Series

This coolant filtration system is designed for grinding mass-produced parts such as automobile parts. This system also uses a magnetic separator and cyclone for filtration, but this is not a two-stage filtration system.Simplified equipment saves space and energyThe following is a list of the most common problems with the

The system is designed to maintain 30 ppm cleanliness over a long period of time, and there is no concern that the cleanliness will decline as the filter deteriorates. Since the effect is constant, the cleaning cycle can be lengthened.

Double circular coolant system "Tamaran

The main feature of this product is that the tank is circular instead of rectangular. It was designed to achieve a super long coolant life.The tank is designed to prevent sludge and chips from accumulating in the tank, and a circular tank with no stagnant areas is realized.The following is a list of the most common problems with the

The inner and outer circles each play a separate role in preventing sludge accumulation, resulting in a double-circle, stable, clean coolant filtration system.

What is the right product selection that can solve the problem?

The choice of coolant filtration equipment varies greatly depending on the purpose and the problem to be solved. Filtration methods, capacity, and accuracy vary by product and manufacturer. You need to choose the product that best meets your challenge. This site introduces recommended products by issue. Please take a look at them for reference.

What is the difference between products?
See how to choose the right coolant filtration system

CNK Case Studies

No information was found on the official website.

What kind of company is CNK?

CNK is a manufacturer specializing in heat treatment to enhance wear resistance of metal surfaces.The company has developed this technology and is now involved in the manufacture of machinery and equipment.The following is a list of the most common problems with the

The four main components of the Machinery Equipment Division are autoloaders that automatically transport workpieces, rolling machines that perform plastic forming, stacker cranes that replace jigs, and coolant filtration systems, which support the machinery industry, mainly for automobile manufacturers.

CNK Company Profile

For grinding process】 【For grinding process】.
Coolant filtration system
Three recommendations

Coolant filtration equipment is used to filter sludge generated from equipment. There are a variety of products available depending on the intended use, so it is important to determine "whether the coolant filtration equipment is suitable for the purpose" and "whether the equipment is suited to the characteristics of sludge.

Filter filtration system capable of filtering all "fine" sludge of 3μm or less Filter filtration system capable of filtering all "fine" sludge of 3 microns or less

Sun Maintenance Koki

Reference: Sun Maintenance Koki official website (https://www.smk-web.co.jp/index.html)

Main materials that can be filtered

• Brittle materials such as cemented carbide, ceramics, and castings

For factories like this

• I want to filter fine sludge less than 3μ.
• I want to use it as a secondary process
• To remove sludge that could not be filtered by other equipment

Check equipment on official website

Capable of filtering "large volumes" of up to 200 l/min Centrifuge

Toto Separator Kogyo Co.

Reference: Toto Separator Industry official website (https://centrifuge-tsk.com/)

Main materials that can be filtered

• Brittle materials such as cemented carbide, ceramics, and castings

For factories like this

• I want to filter more than 100 L
• I want to use it as a primary process
• Want to reduce running costs

Check equipment on official website

High magnetic force filters 5 microns or less High magnetic force enables filtration of 5 microns or less. Magnetic Separator

Sumitomo Heavy Industries Finetech, Ltd.

Reference: Sumitomo Heavy Industries Finetech official website (https://www.shi-ftec.co.jp/)

Main materials that can be filtered

• Metal materials such as aluminum, steel, and iron

For factories like this

• I want to filter metal materials.
• I want to use it as a primary process
• I want to remove metal sludge.

Check equipment on official website